bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about RV Sewer Hose Fittings


  • Fitment of EZ Coupler 4-in-1 Threaded RV Sewer Adapter
  • The EZ Coupler 4-in-1 Threaded RV Sewer Adapter, # F02-3305VP fits threaded sewer inlets. You can attach and remove as needed for storage.
    view full answer...

  • Will The Valterra Clearview Adapter Fit In A 4-1/2 Inch Sewage Hose Carrier.
  • Thanks for reaching out, lets see what we can find. **Valterra Clearview Adapter for RV Sewer Hose - 3" Bayonet Fitting - 45 Degree - Clear Plastic # F02-3111. This unit will be over 5 inches thick, the bayonet fitting is right at 4 inches but the elbow joint makes it to wide.
    view full answer...

  • Collapsable Sewer Hose Support for Shorter Length Hoses
  • A collapsable sewer hose support will absolutely still give you adequate drainage even if it is not fully extended,. I do strongly recommend a high-quality support system such as the Sidewinder RV Sewer Hose Support System # CAM43051 which extends 20' and collapses to 12-1/2", measuring 9-3/4" tall and sloping down to 6-3/4" tall from beginning to end, regardless of if it is extended or not. The Sidewinder Support System works with standard 3" sewer hoses and has snap-fit hinges which...
    view full answer...

  • Solution for Waste Water Staying in Sewer Hoses on RV
  • What I strongly recommend instead that will fix your problem is the Flush King Reverse Flush Valve for RV Holding Tanks and Sewer Hoses - 3" Diameter # F02-4350 because it is designed for the exact problem you are having. It will flush the hoses so the waste water does not stay the "T" on your photo. It would require you to hook up a hose, Flushing Hose for RV Sewer System # W01-4180 (15 feet) or # W01-4300 (25 feet) but would be the remedy to your issue. I have added a link to a video...
    view full answer...

  • Warranty of Viper RV Sewer Hose
  • The Viper RV Sewer Hoses w/ Swivel Fittings and 4-in-1 Clear Elbow Adapter - 20' Long # D04-0475 has a 1-year warranty.
    view full answer...

  • EZ Coupler 4-in-1 Threaded RV Sewer Adapter With 90-Degree Elbow Fitting
  • The EZ Coupler 4-in-1 Threaded RV Sewer Adapter with 90-Degree Elbow Fitting - Red Item # F02-3305VP comes with the cap for the end that drops into the dump station tube. Typically once you install the fitting onto your hose it doesn't need to be removed you would just place the cap on the open end when you are done draining your tanks.
    view full answer...

  • Will RhinoEXTREME RV Sewer Hose CAM39861 Benefit from Sun/UV Protection
  • UV rays and extreme heat are tough on any materials, even ones made specifically for the outdoor environment. I would say that nearly four years of trouble-free service from your RhinoEXTREME RV sewer hose # CAM39861 is pretty good considering your severe environment. This is their heaviest-duty sewer hose. My contact at Camco agreed that you must have taken good care of this item since it lasted for almost 4 years in the Arizona desert. My contact also agreed that anything you can do...
    view full answer...

  • Is the Interior of Lippert Waste Master RV Sewer Hose LC359724 Smooth
  • The Lippert Waste Master RV Sewer Hose # LC359724 is constructed with an exterior helical coil that lets it extend from its compressed length of 5-feet up to its 20-foot maximum length. The interior white surface of the 3-inch diameter hose is smooth, but if not extended fully the exterior coils will cause the interior to have small circular bumps. The linked photo will help you see what I refer to. The more extended the hose is, the smoother the interior surface will be.
    view full answer...

  • How Many Tabs Does The EZ Coupler Cap # F02-3106CL Have For the RV Drain Valve?
  • The EZ Coupler Cap # F02-3106CL has 4 tabs that will fit over the 4 lugs on the sewer drain valve. It does have a 3/4" male thread hose coupler that will allow you to drain your gray water tank without needing your larger sewer hose. It is also available in Black # F02-3106BK.
    view full answer...

  • What Size Screws Are Included With The Valterra RV Sewer Hose Carrier
  • The screws included with the Valterra RV Sewer Hose Carrier # A04-5094BK are #14 x 1" self-tapping screws and would require either a 10mm or 3/8" socket in order to drive them into the trailer frame. Since these are self-tapping you would not need to drill out a hole first for the screw to bite through. If you wanted to go with a beefier screw you can pick up additional ones at your local hardware store.
    view full answer...

  • PVC Fitting Removable On Macerator 4-in-1 Elbow Adapter
  • The PVC nut on the Replacement 4-in-1 Elbow Adapter for SewerSolution Macerator System # SS06 is removable, you simply twist and pull for disconnect, or twist and push for connecting. The Replacement 4-in-1 Elbow Adapter for SewerSolution may work with a garden hose, however, we do sell a direct fit to this product with no modification necessary, with the Extension Hose for SewerSolution Macerator System # SS25. This is a 25' hose that attaches via hose clamps to your SewerSolution Macerator...
    view full answer...

  • How to Know When Blank Tank is Full When Using Flush King Reverse Flush Valve
  • Thank you for the photo, and there should be sensors with a monitor for your tank that tells you how full it is in order to use the Flush Valve for RV Holding Tanks and Sewer Hoses # F02-4350. If you don't have that, you can still use the Flush Valve # F02-4350 but you'll want to be sure to limit the water flow going in so you don't have a real mess. But really, this is best used with black water tanks that have monitors which tell you how full it is. This will work for you unless your...
    view full answer...

  • What Bonding Agent Should Be Used To Attach RV Sewer Pipe Fittings
  • Unfortunately just looking at a picture isn't going to be enough for me to identify what the manufacturer used to glue the 3" pipe reducer # T1041-1 to the other fitting, however I can tell you that you should use some ABS # A05-0303 when you're ready to hook up your new pipe reducer.
    view full answer...

  • Adapter For LaSalle Bristol RV Waste Valve - Sewer Wye Grey Water
  • I'm not 100% sure what you need so I'll give some options for the 1-1/2" grey water adapter for the LaSalle Bristol RV Waste Valve - Sewer Wye - Rotating - 3" and 1.5" Hubs to 3" Lug # 34466N3AR. There is the LaSalle Bristol RV Sewer Spigot with Flange - for 1-1/2" pipe # 34466V1515S, Valterra RV Sewer Spigot with Flange - MPT - 1-1/2" # T1008-1, and LaSalle Bristol Coupling for RV Sewer System - ABS Plastic - for 1-1/4" pipe # 344633000. If you need bonding use LaSalle Bristol ABS Solvent...
    view full answer...

  • Pressure Rating of AquaFresh High Pressure Drinking Water Hose W01-5300
  • I checked with the manufacturer for you and can verify the psi rating is 160 for the AquaFresh High Pressure Drinking Water Hose for RV # W01-5300. It does have a 1/2 inch inner diameter, with the outer diameter of the hose being approximately 5/8 inches. I have added a link below to a video review of the AquaFresh High Pressure Drinking Water Hose for RV # W01-5300.
    view full answer...

  • What Is The Maximum Length Of Your Propane Hose Can Be Before Experiencing Pressure Droppage
  • It is not recommended to have a hose above 20 feet as then you will start to notice pressure droppage. For that reason I recommend the MB Sturgis Propane Hose # MBS57FR which measures in at 15' long. This hose has 3/8" female flare fittings on both ends, and has a maximum pressure rating of 350 PSI.
    view full answer...

  • Connecting 100 lb Auxiliary Propane Tank to 30 lb Tank
  • We do have the parts to connect your 100 lb tank to your 30 lb tank and what you will need is simply the correct tee and then a hose; there isn't an 8 foot hose but there is a 12 foot hose that will work for you. The correct parts are the following: - MB Sturgis Sturgi-Stay T-Fitting for Type 1 Valve - 1/4" FIF and Disposable Cylinder Ports # 103612-MBS - MB Sturgis Sturgi-Stay Propane Fill Hose - POL Pigtail x 1/4" Male Inverted Flare - 12' # 100019-144 The T-fitting will go on your...
    view full answer...

  • Is AquaFresh High Pressure Drinking Water Hose Same as Australian Version
  • The AquaFresh hoses like the AquaFresh High Pressure Drinking Water Hose for RVs - 4' Long x 1/2" Diameter - Blue Vinyl # W01-8048 is not the same as the one from Australia that you are referencing. They are different and have different ratings for things like psi and warranty and are different hoses for different markets. The AquaFresh is an excellent hose that will give you clean, drinkable water that uses corrosion-resistant brass fittings. I have added a link below to a video review...
    view full answer...

  • How To Connect A Dometic 310 RV Toilet To A Supply Line That's Too Far Away
  • You'll just need to run to your local hardware store and grab a supply line to connect your Dometic 310 Part-Timer RV Toilet # DOM37FR to your water inlet. I had to do the same in the attached video below when the new toilet I was installing had the supply line connectors on the opposite side compared to the old setup. There are a variety of different connection types so you'll want to see exactly how the hose will need to connect to your supply line. The hose I got had a "shark bite"...
    view full answer...

  • Replacement For Winntec 6020 With Ill-Fitting Pigtail Hoses
  • We do not have a pigtail hose that is larger than the 1/4 inch, which is the standard size, and the Winntec 6020 is honestly something I would replace, as it has been recalled in the past. Due to this and the hoses not being available, I highly recommend going with a better quality automatic changeover regulator with standard size pigtail hose fittings: - Automatic Changeover RV LP Gas Regulator # 37207-30395 Then for a pigtail hose you can use any of the following, depending on the length...
    view full answer...